• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Installation

Install a auto ghost immobiliser immobiliser on your car and protect it from car thieves. Our TASSA confirmed system safeguards vehicles from hacking, key cloning, and immobiliser bypassing.

The system is hidden in the wiring loom in your vehicle, so it is completely inaccessible to anyone who is looking. It is created by generating an e-pin code push sequence that is pushed through buttons already present on the steering wheel doors, door cards and the central console.

No circuit cuts

A car is a valuable item that takes many years of effort to get, which is why car owners would want to secure their car from theft. Traditional security devices, like wheel locks or alarms, can be easily bypassed by thieves. A ghost immobiliser, on the other hand, is a highly effective solution that is silent and cannot be identified by modern thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network in your vehicle to disable the engine, without the use of radio frequencies or key fobs. It communicates with the vehicle's ECU via buttons already on the steering wheel, dash and door panels to generate an individual pin code that you only are aware of. The code can be altered at any time and can be up to 20 digits in length, based on your preference. It also comes with an emergency code that you could use in the event that you forget your PIN.

The ghost immobiliser is beneficial to stop the relay box at your home from transmitting the signal of your car key, which would unlock the doors and start your vehicle. It can even block new techniques of stealing your vehicle, such as OBD port hacking. The device is small, weatherproof and hard to see. It's also very difficult to hack.

Another advantage of the ghost installation near me immobiliser is that it can be installed inside your car without permanent marks. It's ideal for those who plan to sell their vehicle in the near future. It's also much more efficient and less time-consuming to install than the factory-installed system.

The autowatch ghost Immobiliser fitting Ghost is a groundbreaking next-generation device that can stop theft of cars using contactless technology by connecting to the vehicle's CAN data network and using existing buttons to generate a unique PIN code. This is a snoopy device that can be put in without wires being cut and does not require additional key fobs. It can also be connected to the original ECU of the vehicle, thus preventing thieves from using a different key. This system has been verified by TASSA and is able to be linked to an International Security Register. Owners can rest assured, knowing that their vehicles are protected from theft.

No RF scanning

If you've put lots of time and money into the customisation of your vehicle, you will need to secure it from theft. One method to do this is by installing an immobiliser. It will prevent your engine from running until you enter a unique PIN. By using the buttons on your steering wheel and dashboard, you can create an up to 20 digits in length that is only accessible to you, ensuring that only you are able to drive your vehicle. You can also create a valet and service mode that allows you to temporarily start your vehicle without entering the PIN code. This will permit technicians to work on your vehicle, without being present. This is a great feature for those looking to reduce time and make their lives simpler.

Ghost immobilisers, a new generation device connects to the CAN data network of your vehicle and utilizes the buttons located on the dashboard and steering wheel to create a PIN code. It is designed to blend into with the vehicle's design, as it doesn't emit any noise or LED indicators. It can be put in anywhere on your vehicle, without affecting the aesthetics.

This stealthy system is approved by TASSA and can lower your insurance costs. It also comes with the ability to track, which can locate your vehicle even if it's been stolen. This is great for those who own a unique expensive car which you've invested a lot of effort customizing.

The Autowatch Ghost can be used together with an iPhone application that allows you to start your car remotely if you forget your PIN or are not able to enter the vehicle for some reason. This feature is great for those who need to run errands or pick up your kids, but do not want to let someone else drive your vehicle. This feature is helpful if you have to take your car to a mechanic for service or repair.

Another advantage of the Ghost is that it is unable to transmit or detect radio frequency signals, which makes it undetectable to thieves using RF scanning or code grabbing technology. It also has the ability to protect your car against key cloning and ECU swapping as well as other typical methods of theft from cars.

There is no key to cloning

ghost alarm installation near me immobilisers are a great option for protecting high-end automobiles and are designed to stop key copying. They work by preventing your car from starting unless an additional PIN code is entered along with the normal key fob. This makes it difficult for thieves to steal the vehicle, and may even stop them from trying. This is a great idea if your vehicle has been heavily modified or is rare.

The immobilisers are connected to the vehicle's onboard CAN data network and are completely hidden which means there is no indication of its presence inside the vehicle. It is also impossible for a burglar to locate the device using radio frequency scanning or code grabbing technology. This means that a thief will need to invest longer to steal your car.

A criminal will need to be aware of the unique pin sequence and the exact location of the ghost in order to avoid it. However, the pin code is unique to you and may be changed as many times as you'd like. The pin you select is easy to remember, however, it is mathematically impossible for anyone else to understand. The engineer will also have provided an emergency PIN code in the event that you forget the pin.

The Ghost CAN bus immobiliser is weatherproof, and can be installed in any location of your vehicle. It works with all vehicles and fully customisable to match the look of your car. It is also cost-effective and simple to use. The device can be moved to a different vehicle, provided that it is compatible with the new vehicle.

The CAN bus can be used with other security features. It could, for instance, detect damage to the vehicle and alert the owner. It will also shut off the engine in the event that the vehicle is being manipulated. The system can also protect your vehicle from key cloning and hacking. It can also detect vibrations and contact with the vehicle. Additionally, it will warn the owner if the vehicle has been moved.

No OBD port hacking

Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This stops thieves from trying to hack into your vehicle to disable your alarm, deactivate your key fob, and create new keys. This technology is an improvement over the traditional methods employed by thieves to steal vehicles in the past. The CAN data network means that the system will not be affected by disconnecting or replacing your battery.

The Autowatch Ghost is the first aftermarket CAN bus that is a non-detectable immobiliser that guards against key-cloning, hacking and replica car theft. It works without LED indications or key-fobs, instead leveraging the buttons on your steering wheel, centre console and door panels to let you create a unique PIN code sequence (up to 20 button presses) that must be entered first before you can drive your car away.

Modern thieves utilize diagnostics to identify circuit breakages in your vehicle. They can bypass immobilisers which require a lot wiring or are integrated in the wiring. The Ghost is weatherproof and does not require any additional wiring. It is not able to be detected by diagnostic tools of a professional. It can even be installed on vehicles equipped with anti-theft systems.

Another advantage of the Ghost immobiliser is that your vehicle can only be started by a person who has access to the PIN number and has physical access to your car. This is an advantage over traditional security systems that are easily manipulated with cable tampering or a screwdriver.

You can easily reset your PIN if forget it by using the emergency PIN override feature of a computer or mobile phone. This is useful if you want to start your vehicle after leaving it in a garage, or with a valet parking service.

The Autowatch ghost immobiliser 2 2 is the latest version of the product and is insurance approved by TASSA when installed by one of our authorised installers. It has an RFID fingerprint system that can identify individual parts that allows for the return of stolen items in the event that they are discovered. It can also be set to'service mode' which permits the engine to be started when your vehicle is in a garage or with valet parking however, you must enter your PIN again to exit the car.