• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to leave and come back whenever they want without having to let them in or out. They also help keep your cat from having to go to the bathroom in the house.

It is much easier to put the cat flap on a Upvc panel than on a glass one however, you'll require some expertise and right tools.

Take a measurement of the door

The installation of a cat flap inside a door can be tricky but if you select the right kind of cat flap be patient and follow the steps provided it should not prove to be too difficult. We will be showing you how to mark out the shape, then use the jigsaw to slice the door's area and then complete the job by securing the flap to the door. This will ensure that the flap stays in place and shields the door from wind and rain which can cause damage.

To determine the size of the Cat Flap In Upvc Door Panel flap you need, measure the width of your pet. This will let you select a cat flap that is large enough to allow your pet to go into the house and exit without having to open the door every time.

Once you have the measurements, you can determine the location on the door where the template should be positioned, usually, this is done using an X, but some kits come with an illustration that outlines the location to drill, if yours does, then you can stick it to the door and use a pencil to draw around it. If your door has a sill or moulding at the bottom, be sure that you leave enough space between your cat and these elements.

Utilize a set square to ensure that you are cutting correctly and ensure that the hole is a perfect rectangle shape. When you are satisfied with this, you are able to begin to remove the remaining door material. Use a set square to ensure you are cutting the material properly and that the cut is a rectangle shape. When you are happy with the result, you are able to take out the rest of the door material.

Draw a Line

The cat flap allows you to let your pet inside and outside without having to worry about unwanted visitors or unwelcome gifts. It also stops draughts and helps to keep the temperature of your home stable. Fitting a cat flap to your door might seem difficult to those who haven't tried it before. Many people call an expert carpenter or joiner to complete the work. While this is definitely an option, it's possible to do the job yourself if you own the proper tools and follow instructions carefully.

While this is far easier to do with a timber door, it is still possible in uPVC doors - although you should be careful not to scratch the doors, as this can invalidate the warranty. The first step is to examine the door's measurements to ensure that it can accommodate the new cat-flap. If you have a standard uPVC panel it's easy. However, if your door is composite or another type of door, you might have to be more cautious.

The next step is to determine the height of your cat's stomach. This is the height between the floor and the underside of your cat's stomach. You'll need to locate a space at the entrance that allows your cat to comfortably pass through wall cat flap. Once you've got the information, you'll need to mark the area using a spirit level and a pencil so you are sure that the hole will fit your cat.

After you have marked the area, it's time to cut the hole. You will require a jigsaw and it is important that you be patient to ensure that the cuts are smooth and clean, rather than rough and uneven, as it could cause damage to your door. You should also remember to wear safety glasses and a dust protection mask at all times when using the jigsaw, as breathing in the dust could be hazardous to your health. After you've finished the cutting, you will have to smooth out the edges of the hole using sandpaper, so that your cat flap will fit easily into place.

Make a hole

It can be difficult to put an animal flap on the door panel or double glazing unit. If you are not very experienced in DIY, it is best to hire a professional to do the job for you. A botched job may not just be ugly, but also a security risk and also allow cold air to get in when the cat is outside, and hot air to escape when inside.

Mark the hole's position on the door using a pencil and spirit level. This will ensure that it is properly positioned and is flush with the rest of the door. Make sure to have sandpaper on hand to smooth any rough edges.

After the line is traced, you must cut the hole using a jigsaw. Be sure to wear any necessary safety equipment when working with a power tool. If you are concerned about the sound produced by a jigsaw you can buy a cordless version which is much quieter and easier to use.

It is best to only remove the material that is required to create the cat flap. A small amount of material is required to increase the thickness of the wall of the flap, but cutting off more than this can cause problems and even damage the doors frame.

If the upvc door features a metal panel or frame, it may interfere with the microchip flap. In this situation you'll need create an over-sized hole to ensure that the metal doesn't come into contact with walls of the flap.

If you're installing the cat flap onto an upvc door or a double glazed windows with a frame made of metal, you will need to speak to a specialist who can supply you with a new glass pane that already has the hole for the cat flap already drilled inside. It will be much cheaper to do this than trying to fix the cat flap onto an existing pane of glass that has not been manufactured specifically for the purpose.

Fit the Flap

Cat flaps allow your pet the freedom to move around whenever they like, allowing them to relax in the home whenever they want to. However, if you have a uPVC door, it may be difficult to put in an animal flap, especially when you don't have a glass pane that can be cut to fit one. Luckily, if you're happy to purchase and install a half-glazed replacement upvc door panel with cat flap uPVC panel, it's possible to add the cat flap to these doors. It's not a matter of cutting a hole into the door. You'll also need to do a few things to ensure that it is secure.

A uPVC, GRP or composite door panel typically comprises a flimsy plastic outer skin joined to a soft insulating polystyrene core. It is crucial to be careful when cutting the material. This type of door usually includes a template that you can use as a guide for cutting the hole in the door.

After you have carved out the hole in your front door, it's time to put in the cat flap. You can buy and fit a wide variety of different models including basic push-button operated models to microchip-activated ones that only let in your pet. Whatever type of cat flap you pick, it's vital that your cat is able to use the flap comfortably without getting stuck outside in the rain.

It's a good idea select circular fittings instead of a square one, as circles are more securely cut into door glass. It's because square holes are more likely to crack the glass when they're drilled. It's also a much safer choice to use since you're not at risk of having to drill into toughened glass that may break and injure your pet or family members. This is particularly important if you have a young or elderly person in your home who could be injured by shards of glass.