• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Make sure to check the sashes of your windows regularly for damage, mildew, and mold. If you catch these issues early, you can save money on future repairs.

The sash is the interior frame that is vertically moved up or down in windows that are open. This article will demonstrate how to perform several simple repairs to the sash.

Weather Stripping

Wooden window sashes can add an elegant appearance to your home. They are also durable and will last for many years provided they are properly maintained. However, they can become damaged or degrade in time because of exposure to the elements and normal wear and tear. Thankfully, sash repair experts can restore your windows back to their original condition and keep them looking fantastic for longer than replacement windows.

The first step to repair sash windows is to address weather stripping, which can be found on both the sash as well as the frame. If it's worn or loose, out, it could cause drafts and 257634 other issues. To fix it, begin by determining your window's brand and the date on which the glass was manufactured (etched in the corner of the glass or on the aluminum spacer between panes). Then, take the sash off and mark its height and width to find replacement weather stripping to match.

Then, remove the sash and place it on a surface to allow access to all four sides. If your sash was double-hung, you must remove the weights using their ropes that should fall into the pocket in the jamb lining. After removing the sash with the utility knife, 257634.xyz take off the old weather stripping by hand or using a putty blade.

Once the sash is clear and clean, you can put in the parting stops. They are long pieces of wood that are used to separate the two sashes. Pam likes to replace these with standard 1/2-inch-by - 3/4-inch window trim from the lumberyard, 257634.xyz however you can also use scrap wood.

After removing the parting stop and trimming it to length after which, apply a thin layer of glazing compound to the bottom of the sash. Smooth it out using your putty knife, then let it dry for at least a few days. Once the putty has fully dried it is possible to apply a topcoat of acrylic. This will protect the putty and give your sash a fresh look.

Sash Hardware

The hardware that supports window sashes may wear out over time and use. This can result in windows or doors that is difficult to open or close. The good thing is that fixing and replacing this hardware is typically quite simple and inexpensive. If a sash is difficult to operate try spraying oil into the jamb channel then slide it open to see if that resolves the issue. If not, the issue is likely with the sash balance and you'll need to remove the sash to gain access to the hardware.

Sashes for windows should be able to open and close with little effort. However, this may be difficult if the weights are worn out or the sash meeting rail is not properly coated. This problem could be caused by various reasons such as a lack of maintenance and a mismatched weight rating.

If the hinges on windows begin to slide, this could cause the sash to drag and eventually hit against the frame in the opposite corner (Photo 1). To fix the problem make sure the sash is aligned in the frame's opening and take it off. If the sash is attached to the hinge arm, unbolt the hinge and replace it. (Photo 2). Then, put in the new sash (Photo 3).

Due to hinges that are sagging, and a general lack in energy efficiency, older windows especially in older houses, could be difficult to open and close. In many instances, a few easy repairs can transform these windows into smooth operation again and save the homeowner cash on energy costs.

It is essential to have the tools needed before you begin. Mark the hinge channel's location on the frame (Photo 1) with a pencil. This will allow you to get the channel back into position correctly after you've completed. Remove the sash and take off the hardware including the beads that separate (Photo 2) and the cords or chains that hold it in place. Soften any putty that has been hardened with a heat gun set to medium and equipped with an shield to block the nozzle. Take off the old sash and store it in an bag with a label.

Sash Weights

Whether your window sash repairs are to replace a damaged cord or to ensure that the windows are functional by replacing worn out weights for sash will improve its operation and help reduce the energy cost. Sash weights are heavy lead or iron cylinders that are enclosed in a concealed cavity and linked to the moveable sash by rope. These weights act as counterbalances and 257634.xyz allow you to open and close the window without requiring mechanical or electrical devices. If they fail, sashweights tend to be neglected or not used by homeowners.

A weight in a sash that has fallen out of the cavity is difficult to recover and you'll need to locate a new one that is suitable for the. You will also require a fresh piece of string, a length sashcord and a few sashpulleys to secure the new weights to the cord.

Mortise and Tenon joints are used to join old wood windows. Hammers and 257634 pins can be used to cut off the wood pegs that hold the components together. Most of them have a large diameter on one side and a smaller one on the other side, so it is important to remove the smaller-diameter ones first. Later sashes used glue instead of pins. They can be cut by using a knife and a mallet.

After the sash has been removed, you can remove the sash stop and access the weight pocket. Usually, this is done through an opening in the bottom of each jamb. The hole is then covered with a wooden access panel that can be ripped off to let you see the inner workings of the frame.

Once the sash is stopped and the access panel is removed, you can take off the weight you used and replace it. Be sure to weigh the sash first because the weights you've got may not be the right size. After the new weight is in place, tie a string to it and thread it through the sash pulley. Then, you can attach the string to your boxed frame. Leave a few inches of space at the head of the string for future adjustments.

Sash Cords

Most old double-hung windows have a cord or chain attached to the weights that supports and keeps the sashes level in the jamb. Over time, these cords can become damaged and make it impossible to raise windows. A new sash cord will restore the ability to move the sash upwards and downwards and keep it in position when it is opened.

To replace sash cords, the first step is to remove the access panels from the jambs. They are usually attached by nails or screws and need to be removed. You might be able to use a hammer or chisel to remove them, but it's always better to lay down dust sheets prior to commencing any work.

After the access panel has been removed, you can begin working on the sash. Take the narrow beads (also known as "tie rails") out of their grooves using flat bar or chisel. These are often wedged in or nailed, but they can be snipped out and it's worth your time here. If the sash is in place, pry out the mortise and tenon joints using a hammer and pin punch or screwdriver, and then take out the wood pegs on the components. The sash should be able move around freely now, however it might require some lubrication to make it feel less stiff.

With the sash open Take a measurement of the sash chain to reach from the pulley on the top of the jamb to the sash slot at the bottom. Cut the chain or cord and secure it as in Step 6 above. You can do this with a hammer, nails or screws. However nails are less likely than screws to cause damage.

If you don't have an upgrade kit to replace the counterbalance system that was in place before, it is recommended to keep the original balancing weights in place. They're not costly and are easy to install if you purchase them at architectural salvage stores. Based on the size of your window, two or three sash weights might be required to keep it in an open position.