• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door handles for doors

Over time, the handles on your doors will wear out and need to be changed. It is crucial to be able to match the dimensions of the old handles when replacing them.

The three measurements to be inspected are the top screw's position as well as the key hole and lever sizes. Use the size guide to assist you.

Inline Lever/Lever

A lever handle is a contemporary door handle designed to suit new or replacement doors. This kind of handle is available in a variety of designs and finishes. This handle is available from several manufacturers, including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/composite door handles [read review] are made of robust materials and are perfect for multi-point lock doors that require a strong design. The handles are inline and operate from the same spindle and screw fixings, so they are easily installed on existing or new uPVC/Composite doors.

The handle can be positioned and angled to suit any user. The handle has been tested for endurance up to 200,000 cycles. This helps to ensure that the finish is of high quality and performance is maintained over time. The sprung lever can also be cut to fit a wider range of locks. This is particularly useful in doors with smaller door frames where the cylinder is further back. A shorter lever is a good choice for doors that have latches that can be opened by a thumb turn inside.

Lever Pad

A Lever Pad door handle made of upvc functions differently from lever-type handles for patio doors on doors. The handle can use a single spindle (inline) or independently from both sides using two offset or inline spindles (pad). They are typically used on UPVC doors with double glazing and come in a variety of finishes & variations.

The handles are available in various finishes, including White chrome and Gold. The finish meets BS EN 1670:2007 Grade 5 and is also resistant to corrosion, giving the handle a high degree of durability and performance for the intended use.

All UPVC handle lever pads include a spindle and screws, and can be fitted on a uPVC door. The 211mm backplate fixing centres allow for a larger handle, which can be beneficial when replacing a window handle a faulty or worn multi-point door lock mechanism. These handle levers are also sprung, solving the problem of door handles sagging from their horizontal position when they are not being used.

When choosing the replacement UPVC handle and spindle, it is essential to match the dimensions of the PZ on both the multipoint lock and the uPVC door. This measurement is also referred to as the "handle centre" or "cylinder centres and is an essential aspect in ensuring that you have the correct handles and hinges.

Once you have the correct PZ size you will then be required to make sure that the handle lever pads and push pads are in a appropriate shape to accommodate the American with Disabilities Act (ADA) compatible handles you require for your doors. These are typically round or square with an internal lever and an external push pad.

The majority of UPVC Lever Pads that we sell are spring-loaded. This means that they will return to a horizontal position when not being used, rather than hanging and possibly securing to the frame. This stops draughts from entering the building. The majority of UPVC lever pad handles are available in left and right handed versions that allow them to be placed on either side of the doors.

Euro Cylinder

Cylinder locks are typically found on uPVC doors, but they can also be found on other types of doors. The cylinder lock operates by using a key that unlocks the cylinder's casing. The case is then able to reveal pins that can be aligned to the pins in the lock, allowing them to rotate the camera that rotates, opening the door. Euro Cylinders can be fitted with up to six pins, with both internal and external doors generally having different levels of security.

The choice of cylinder is essential. It depends on the use that your doors and handles receive. Doors that are external, for instance, should be fitted with cylinders with greater security while internal doors can be secured using a standard cylinder. Certain cylinders come with extra features that increase security, like anti-drill or anti bump properties.

To ensure that the euro cylinder is of the right size for your bifold door handle replacement, it must be measured accurately. The cylinder should be measured from the screw hole at the center to the ends of the cylinder. This includes the thumb turn if there is one. If you are unable to measure using the lock in a fixed position, you can remove it. A cylinder that protrudes beyond the handle and escutcheon could be vulnerable to attacks such as snapping locks, so it is crucial that it is not too long.

Most modern cylinders are made with bump and anti-drill features built into their design. These are designed to reduce the chance of a attack by forcing the cylinder rotate in an opposite direction. This will help deflect the attack, and keep your door safe.

There are also cylinders designed to resist snapping. This is an increasingly common type of attack on cylinders where the break line inside the lock is attacked by a tool that is specially designed to break the front of the cylinder and allow the door to be opened. This is faster and less difficult than opening the door with a multipoint lock and leaves little evidence of a break-in, which could hinder the insurance claim.

Spring Cassette

This spring cassette is found inside the base plate of the door handle. It provides a sprung solution to bring your multipoint lock handles to their original position after usage. Previously a lot of these types of handle didn't have a spring built into them, and as a result, they can droop or drop once the locking mechanism has been disengaged. The addition of this simple element is among the best methods to correct this, and is an excellent way to stop your upvc doors from getting stuck in either closed or open position, as they are not always easy to manually close by hand.

These spring cassettes were designed to be used with a spring multipoint locks. They will not fit unsprung handles and you'll have to cut a hole in the backplate to allow them to fit. (Please look at the image for a more detailed diagram). They are a replacement for damaged or missing cassettes inside the backplates of door handles of various brands of uPVC doors. They are fitted with a square cut out which accommodates an 8mm spindle and are available in a variety of.

These spring cassettes are a great value-for-money way to fix the problem of handles on your doors that are sagging. These spring cassettes are simple to install and will increase the life of your uPVC door. Please contact our team to learn more about our selection of uPVC accessories and spares. We are always available to provide expert advice and to assist you.