• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC replacement upvc door handles Door Handles

Over time the handles on your doors will get worn out and need to be changed. When doing this it is crucial that the new handles conform to the dimensions of the previous handle.

The top screw position, the lever and the keyhole dimensions are the three measurements you need to verify. Use the size guide to help with this.

Inline Lever/Lever

A lever or lever door handle is a modern handle that can be put in on new or replacement doors. This type of door handle is available in a wide range of styles & finishes. This handle is available from several manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The handles made of uPVC/Composite are made from durable materials, and are ideal for doors with multiple points that require a robust design. The handles are inline and they use the same spindle and screws to secure them. They can be easily mounted on any uPVC/Composite victorian door handle.

The spring lever design allows the handle to be set and angled to provide a comfortable grip and is suitable for all users. The handle has been endurance tested to 200,000 cycles. This will ensure the quality of the finish and the performance of the handle over time. The sprung lever can also be shortened to fit the widest range of locks. This is useful in doors that are narrower, where the cylinder is further away from the door. A shorter lever is a good choice for doors where the latch can be operated by a thumb turn on the inside.

Lever Pad

A Lever Pad door handle made of upvc operates differently than lever handles on doors. These handles can work off one single spindle (inline) or independently from both sides using two offset spindles or inline (pad). They are generally used on UPVC double glazed doors and are available in a variety of variations and finishes.

The handles are available in various finishes, including White Chrome, and Gold. The finish is BS EN 1670 Grade 5 and is resistant to corrosion. This gives the handle the best performance and long-lasting durability for its intended purpose.

All UPVC levers for handles come with a spindle, screws, and can be fitted on the uPVC patio door handle locks. The backplate fixation centers of 211mm allow for a wider handle, which is usually a benefit when replacing an old Aluminium window handles or damaged multi-point door lock mechanism. These handle levers are also sprung, solving the problem of handles that slide out of the horizontal position when they are not in use.

When selecting a replacement replace upvc window handle handle and spindle, it is essential to match the dimensions of the PZ on the multipoint lock as well as the uPVC door. This measurement is often known as the "handle centre" or "cylinder centres and is an essential aspect in ensuring that you have the right handles.

Once you have the correct PZ size, you'll have to ensure that the handle lever pads and push pads are of a appropriate shape to accommodate the American with Disabilities Act (ADA) compatible handles you need for your doors. They are typically round or square with an internal lever and an external push pad.

The majority of UPVC Lever Pads we sell are spring-loaded. This means that they will return to a horizontal position when they are not in use, rather than hanging and possibly being stuck in the frame. This keeps draughts out of the property. Also, the majority of UPVC lever pad handles are hand-operated, allowing you to install them on either side of the door.

Euro Cylinder

Cylinder locks can be found on uPVC and other kinds of doors. They work by using a key to unlock a cylinder that is then revealed with pins that can be aligned to those inside the sash lock door handles body, allowing them to turn the cam, thereby opening the door. Euro Cylinders are available with up to six pins. External and internal doors require different levels of security.

The selection of a cylinder is essential. It depends on the use that your doors and handles receive. External doors, for instance should be equipped with cylinders that are more secure and internal doors can be secured using the standard cylinder. Additionally, certain cylinders have extra features which can enhance security, for instance anti-drill or anti-bump properties.

A euro cylinder must be properly measured to ensure it is the correct size for your door. The cylinder should be measured from the hole for fixing screws in the middle to the end of the cylinder including the thumb turn if you have one. It is best to do this with the lock in place, but if this is not possible, you may remove it to take measurements. A cylinder that protrudes beyond the handle and escutcheon may be vulnerable to attacks, such as snapping locks, therefore it is important that it's not too long.

The design of most newer cylinders comes with anti-drilling as well as bump resistance features. They are designed to minimize the chance of attack by forcing cylinders to turn in a different direction. This can help stop the attack and ensure your doors are secure.

There are also cylinders that are constructed to withstand snapping. This is an increasingly common kind of attack on cylinders, where the break line in the lock is targeted using a special tool to snap off the front of the cylinder to allow the door to be opened. This is a lot faster and more straightforward than gaining access through multipoint locks. It also leaves no evidence of a break-in which could hinder the insurance claim.

Spring Cassette

This spring cassette sits within the base of your door handle's backplate, providing a spring solution to return the multipoint lock handles back to their rest position after using. There was a time when handles of this kind did not have a spring integrated into them, and without it they tend to droop or 'drop' once the locking mechanism is disengaged. Adding this simple component is one of the best methods to correct this, and is a great way to prevent your doors made of upvc from becoming stuck in either closed or open position, as these aren't always simple to manually close by hand.

These spring cassettes have been specifically designed to be used with multipoint locks that are sprung but they won't work with multipoint handles that are not sprung and you must have a custom hole cut into your backplate in order for them to fit (please look at the image for a technical diagram). They are a replacement for existing damaged or missing cassettes inside the backplate of the door handle for numerous brands of uPVC doors. They are available as a single unit. They have a square-cut out that can accommodate an 8mm shaft.

These spring cassettes provide a great value solution to the problem of sagging door handles. They are simple to put in and will extend the lifespan of your uPVC doors. For more information on our wide range of uPVC accessories and spares, you can get in contact with our team. We are always happy to offer expert advice and support you.